Plastimo
Water on Board

Water on Board

We all love water… except in the boat : Plastimo proposes a full range of bilge pumps, scuppers, valves and thru-hulls. Water on board, as Plastimo sees it, is also  essential to comfort and comes as products or  systems for fresh water storage and waste water treatment. 

Range overview

All products : > Water on Board > WC

25-litre mini-kit

Complete installation consists in a 25-litre holding tank, a diverter valve and connexions. Compact kit, ideal where space is at a premium ; requires minimum works on board.

Manual toilet

• Compact.
• Double action pump for easy flushing and pump out.
• All metal parts made of marine grade stainless steel.
• Intake 3/4" - 19 mm ; discharge 1 1/2" - 38 mm.
• Bowl fixed on the base by a bayonet catch. This make installation, maintenance and inspection easier (depending on the model).

Electric toilet

• Vitreous china bowl allows easy cleaning.
• White laquered wooden seat and cover.
• All metal parts made of marine grade stainless steel.
• Intake 3/4"- 19 mm ; discharge 1" - 25 mm.
• Horizontal macerator pump in re-inforced plastic.
• Max. discharge height : 1.5 m.
• Power consumption : 13 Amp in 12 Volt ; 7 Amp in 24 Volt.
• Meets the ISO 8846 ; EN55014 standards.

Diverter valves

ABS and stainless steel. 90° elbow fittings.

Electric conversion kit for manual toilet

Nitrile rubber.
Convenient for models 403060, 403045 and 416365.
To convert the model 403089, a base 12346 and a gasket 12355 are needed.

Electric toilet - Conversion kit. To convert manual toilet into electric toilet. Complete kit including pump, hose, control panel, bolts and washers.

• Vitreous china bowl allows easy cleaning.
• White laquered wooden seat and cover.
• All metal parts made of marine grade stainless steel.
• Intake 3/4"- 19 mm ; discharge 1" - 25 mm.
• Horizontal macerator pump in re-inforced plastic.
• Max. discharge height : 1.5 m.
• Power consumption : 13 Amp in 12 Volt ; 7 Amp in 24 Volt.
• Meets the ISO 8846 ; EN55014 standards.

Electric toilet - Converson kit. To convert a manual toilet into electric toilet. Complete kit including pump, hose, control panel, bolts and washers.

• Vitreous china bowl allows easy cleaning.
• White laquered wooden seat and cover.
• All metal parts made of marine grade stainless steel.
• Intake 3/4"- 19 mm ; discharge 1" - 25 mm.
• Horizontal macerator pump in re-inforced plastic.
• Max. discharge height : 1.5 m.
• Power consumption : 13 Amp in 12 Volt ; 7 Amp in 24 Volt.
• Meets the ISO 8846 ; EN55014 standards.

Sealock manual toilet

The in- and outlet of the Sealock toilet can be completely locked when not used : for extra security against incoming water.
Toilet mechanism can be installed at the right or left side of the bowl, depending on the space available.