Plastimo

AIS TR-210

Ref: 61904

This Class-B AIS transceiver module enables both the transmission and reception of AIS data from your boat. Your vessel identification data is programmed into the TR-210 using the software and cable included with the transceiver. The TR-210 AIS transceiver output connects to your GPS/Plotter via the NMEA 0183 interface and to your PC through the USB connector. The TR-210 has an internal GPS antenna providing vessel position data to the AIS transmitter.
An external GPS antenna can be connected if necessary (ref. 62173).

NMEA 0183
USB
NMEA 2000

Features

Specifications  AIS TR-210
 Dimensions  140 x 100 x 42 mm (L x W x H)
 Weight  280 g
 Power

12 to 24 VDC - Average power consumption < 2 W
Power consumption : 150 mA@12VDC

 GPS receiver 50 channels. Complies with the IEC 61108-1 standards
 Electrical interfaces

NMEA 0183, 38400 Baud (output), NMEA 0183 4800 Baud (input) - USB - NMEA 2000®

 Supplied with

2m power, USB and NMEA 0183 cable - Configuration software and USB drivers on CD - User manual and quick start guide - Fixing screws.

 VHF receiver -
 VHF transmitter 1 transmitter - 2 receivers - Frequency :156.025 to 162.025 MHz in 25 KHz steps. Output power 2W. Rx sensitivity : <-110dBm
 Performance  -
User interface 4 LED indicators for power, transmit timeout, Error and Silent mode
Operating temperature  -15°C to +55°C
 Waterproofness  IPX7. Complies with the IEC 60945 standards

 

Technical documentation & diagrams