Plastimo

Britany® anchor

The Britany is the only flat anchor with a shank designed not to foul, thus preventing the anchor from breaking away. It bites into the seabed within seconds.

High resistance galvanised steel (55 kg of steel per sq. mm).

Models

Boat length Ref. Weight kg Weight lb A B
Dinghy, tender 16456 2 4.4 410 mm 185 mm
Dinghy, small catamaran 16457 3.5 7.7 498 mm 219 mm
5.50 m 16458 6 13 547 mm 270 mm
6.50 m 16459 8 17.6 647 mm 312 mm
7.50 m 16460 10 22 732 mm 347 mm
9 m 16461 12 26.5 786 mm 347 mm
10.50 m 16462 14 30.8 788 mm 368 mm
12.50 m 16463 16 35.3 841 mm 368 mm
16 m 16464 20 44 910 mm 414 mm
18 m 16465 25 55 970 451 mm
20 m 16466 35 77 1038 mm 522 mm
25 m 16467 45 100 1085 mm 550 mm
+ 25 m 16468 65 143.3 1196 mm 594 mm
+ 25 m 16469 90 198.5 1297 mm 666 mm

Features

 

 

Boat length

Ref. Weight A
mm 
B
mm 
D
mm 
E
mm 
F
mm 
G
mm 
Kg lb
Dinghy, tender 16456 2 4.4 410 185 10 20 12 22
Dinghy, small catamaran 16457 3.5 7.7 498 219 10 20 14 26
5.50 m 16458 6 13 547 270 12 24 14 30
6.50 m 16459 8 17.6 647 312 12 24 14 30
7.50 m 16460 10 22 732 347 14 28 16 37
9 m 16461 12 26.5 786 347 14 25 18 41
10.50 m 16462 14 30.8 788 368 14 28 18 41
12.50 m 16463 16 35.3 841 368 16 32 20 41
16 m 16464 20 44 910 414 16 32 22 41
18 m 16465 25 55 970 451 16 32 22 44
20 m 16466 35 77 1038 522 19 38 22 52
25 m 16467 45 100 1085 550 25 50 25 64
+ 25 m 16468 64 143.3 1196 594 28 56 30 72
16469 90 198.5 1297 666 31 62 35 80

Anchor weight per boat length is only given as an indication. However, your anchor selection should also recognise the specific construction of your vessel.

Instant biting into the sea bed :

  • To prevent potential fouling, the Britany has no large crown.
  • To avoid clogging by pebbles, the Britany has no link cage.
  • Thin flukes with sharp edges : ensures quick digging even in the hardest sea beds.
  • Geodynamic flukes, ensuring easy burial and perfect holding.
  • High resistance shank, cast in one piece : gives perfect resistance even to a strong lateral pull.
  • Narrow crown, designed to lift the rear of the anchor, so that the flukes dig in immediately.

Technical documentation & diagrams