Bumper 3/4

The Bumper is a really efficient fender, to be fixed on the pontoon ; according to its location, it provides efficient protection to the bow and amidships.
Suitable for all pontoon or catway shapes : square or round end pontoon. 
Sturdy construction, from rotomoulded PVC, UV-ray protected. 
Registered design.

Max. pressure : 0.10 bar / 1.45 psi


Ref. Model
38082 3/4 standard, WHITE
39357 3/4 standard, BLUE
66401 3/4 standard, GREY
30102 3/4 standard, WHITE
37781 3/4 standard, BLUE
36856 3/4 standard, GREY
37783 3/4 Foam-filled, WHITE


  3/4 shape BUMPER, standard  3/4 shape BUMPER, foam filled
Model White Blue Grey White Blue
Ø 18 x 40 cm 28082 39357 66401 - -
Ø 25 x 90 cm 30102 37781 36856 37783 37784

The Bumper filled with foam is ideal for boats from 9 m
and is also recommended for very busy pontoons
(such as the technical pontoon : fuel and water intake…).

Technical documentation & diagrams

Plastimo tips & tricks

Whether you sail shorthanded or singlehanded, whether you are a beginner or a confirmed skipper, the Bumper will take away some “emotional” moments when approaching the pontoon, in particular when the wind blows hard and currents are unkind.

A bow Bumper really facilitates dock manoeuvres, and a second Bumper amidships protects efficiently against shocks.

  • Pressure

We advise you to check the pressure of your fender or Bumper once or twice a year. The right pressure is obtained by using a pressure gauge or by measuring the circumference of your Performance fender. To be really efficient a fender or Bumper must be neither under nor over inflated.

Recommended pressure for Bumper : 0.07 to 0.10 bar

You may also be interested in the following product(s)

Bumper 1/2

Standard or foam-filled. Half shape for vertical mounting along pontoons.

Bumper fits all-pontoons

Most effective Bumper (patented) suitable for all pontoon types. No-drill mounting system.