Electric inflator

Ref: 37213

Suitable to inflate or deflate all inflatable structures.

  • Output 800 L/min.
  • Pressure 190 mbar - 2,8 psi.
  • Power 750 W.
  • Voltage 230 V.
  • Overall dimensions : 24 x 13 x 13 cm (L w W x H).

Nozzle fittings and 2 m hose included. 

  • CE

Technical documentation & diagrams

Plastimo tips & tricks

Recommended pressure :

  • For tender’s tube = 300 mBar.
  • For inflatable floor = 800 mBar, the correct pressure for required rigidity of the floor and optimum performance of the tender.

Inflate the floor normally until pumping becomes difficult, giving clear indication that you should switch to the second chamber which will provide the extra pressure required (see pump instructions manual).

Remember to ease the pressure if you leave your boat inflated on a hot day, to prevent potential distortion due to volume fluctuation caused by the heat.