Plastimo

Foot pumps

Heavy duty foot pump particularly suitable for synthetic or rubber coated boats.

  • Glassfibre polyamide plates.
  • Reinforced fabric coated bellows.
  • All metal parts in stainless steel.
  • Reinforced hose.
  • Universal adaptor.

Models

Ref. Capacity Pressure gauge Max. pressure Dimensions
57713 4 L - 400 mbar - 5.8 psi 28 x 21 x H 6 cm
10157 5 L - 400 mbar - 5.8 psi 29 x 21 x H 8 cm
55669 6.5 L Yes 300 mbar - 4.4 psi 32 x 23 x H 7 cm

Technical documentation & diagrams

Plastimo tips & tricks

Recommended pressure :

  • For tender’s tube = 300 mBar.
  • For inflatable floor = 800 mBar, the correct pressure for required rigidity of the floor and optimum performance of the tender.

Inflate the floor normally until pumping becomes difficult, giving clear indication that you should switch to the second chamber which will provide the extra pressure required (see pump instructions manual).

Remember to ease the pressure if you leave your boat inflated on a hot day, to prevent potential distortion due to volume fluctuation caused by the heat.

You may also be interested in the following product(s)

Turbo Max inflator

Inflates and deflates inflatables and RIBs up to 10 m.

Double chamber pump

Reaches a max. pressure of 1 bar without effort.
Ideal for tenders' inflatable floor.

Super Turbo electric inflators

Inflates and deflates large units in a few minutes (RIB's up to 5 m, kites, SUP...).