Electronic battery isolators RCE

Electronic battery isolators with MOSFET technology (MOS transistors).

RCE isolators (Répartiteurs de Charge Electronique) provide an optimum battery charge, with no voltage drop and without raising the battery temperature, where traditional splitters would typically lose approx. 0.7 V.

RCE instruments isolate battery banks and direct automatically the current load to the lowest charged battery.
They operate on 12 or 24 V from any source of energy : alternator, wind generator, solar panel, charger, etc.

Complete and quick charge of 2 or 3 battery banks :

Integrated ignition alternator terminal (except ref. 477519)
Connection : + battery on threaded rods, - battery on Faston terminal at minus common (reference)
Operation status indicator (operational voltage)
Operating temperature : -40°C / +85°C
Natural cooling
Meet standards : EN 50081-1 (emission) ; EN 50082-1 (immunity) ; EN 60950-1 (safety)

Add to Wishlist

Models

Description	Ref.	Nominal current	Number of inputs	Number of outputs	IG terminal (Alternator excitation)	Dimensions L x H x D	Weight
100A 1E/3IG	478774	100 A	1 (Ø M6)	3 (Ø M6)	Yes	158 x 146 x 85 mm	0,8 Kg
100A 2E/3	477519	100 A	2 (Ø M6)	3 (Ø M6)	No	158 x 146 x 85mm	0,8 Kg
150A 1E/2IG	478775	150 A	1 (Ø M8)	2 (Ø M6)	Yes	146 x 97 x 85 mm	0,8 Kg
150A 1E/3IG	477518	150 A	1 (Ø M8)	3 (Ø M6)	Yes	158 x 146 x 85 mm	0,8 Kg
180A 1E/2IG	63849	180 A	1 (Ø M8)	2 (Ø M8)	Yes	146 x 97 x 85 mm	0,8 Kg
180A 1E/3IG	63850	180 A	1 (Ø M8)	3 (Ø M8)	Yes	158 x 146 x 85 mm	0,8 Kg
200A 1E/3IG	478776	200 A	1 (Ø M10)	3 (ØM8)	Yes	158 x 146 x 85 mm	0,8 Kg
100A 1E/2IG	477517	100 A	1 (Ø M6)	2 (Ø M6)	Yes	146 x 97 x 85mm	0,8 kg

All products in the range