Plastimo

Digital monitor for CPS3 battery charger & shore power unit

Ref: 475656

Compatible with the entire CPS3 charger range (except for 48 V models).
Adapts automatically to the number of batteries connected to the charger (1, 2 or 3).

Can be mounted on dashboard with no need for any additional equipment, other than fixing screws. 
2-line, 16-digit LCD display.
Integrated backlight.

CONNECTED CHARGER :
- Start. BATT. / BATT 1 / BATT 2 voltage
– Charger operating time
– Charger current
– Charger output overload fault.

DISCONNECTED CHARGER :
- Start. BATT / BATT 1 / BATT 2 voltage
- Start. BATT / BATT 1 / BATT 2 charge percentage estimation
- Start. BATT, BATT 1, BATT 2 discharged fault.

  • NAV_N_GAR2_ANS_G_11421__

Features

  • 1 Go/Stop push-button if charger is not in use and operating on batteries only.
  • 110 x 110 mm built-in electronic plate
  • Protective jacket to clip onto plate 
  • Fastening : 90 x 90 mm opening + 4 x 4 mm Ø holes
  • Connection : 10 m cable supplied with telephone-type end fitting
  • Natural convection
  • Operating temperature: -10°C to +50°C
  • Consumption : 0.5 mA on standby / 30 mA in normal operation