Plastimo

Fuel tanks

Tanks in high density polyethylene. Supplied with a polyamide multi-purpose plate.
Plate features:

  • A 1" 1/2 fuel inlet (comes standard with a vent cap).
  • A pickup fitting for hose Ø 7-9 mm (1/4" thread).
  • A vent outlet for hose Ø 17-19 mm (3/8" thread).
  • A flange for an electric or mechanical sending unit (available as option).
  • An additional 1/4" threaded hole for a diesel return or a second pickup fitting.

Meet 94/25/CE directive, as amended by directive 2003/44/CE.

  • CE

Models

Capacity Ref. Dimensions (L x W x H)
33 L 27268 500 x 350 x 230 mm
43 L 27269 650 x 350 x 230 mm
53 L 27270 800 x 350 x 230 mm
70 L 61990 800 x 400 x 280 mm
84 L 61991 950 x 400 x 280 mm
96 L 61992 1100 x 400 x 280 mm
42 L 61987 500 x 350 x 300 mm
55 L 61988 650 x 350 x 300 mm
70 L 61989 800 x 350 x 300 mm
102 L 61993 800 x 400 x 400 mm
120 L 61994 950 x 400 x 400 mm
140 L 475343 1100 x 400 x 400 mm

Features

Capacity Ref. Dimensions
(L x W x H) mm 
Options
Electric sending unit Mechanical gauge 
10-180 Ohm  240-30 Ohm 
33 L  27268  500 x 350 x 230  61999    62004    27272   
43 L  27269  650 x 350 x 230 
53 L  27270  800 x 350 x 230 
70 L  61990  800 x 400 x 280  62001    62006    27271   
84 L  61991  950 x 400 x 280 
96 L  61992  1100 x 400 x 280 
42 L  61987  500 x 350 x 300  62047    62048    62011   
55 L  61988  650 x 350 x 300 
70 L  61989  800 x 350 x 300 
102 L  61993  800 x 400 x 400  62003    62008    428721   
120 L  61994  950 x 400 x 400 
140 L  475343  1100 x 400 x 4000